Every Samsung Microwave Error Code and What It Means

Welcome to TheKitchenApplianceDad.com, where we dive deep into the nitty-gritty of your favorite kitchen gadgets. Today, we’re placing the spotlight on a common household hero: the Samsung microwave. Like any sophisticated appliance, Samsung microwaves are equipped with a digital display that may sometimes flash an error code, signaling that something’s amiss. Understanding what these codes mean can save you time, money, and unnecessary stress.

So, let’s decode the digital hieroglyphics of Samsung microwaves and ensure you’re equipped to handle any beep or blink your microwave throws your way.

Common Samsung Microwave Error Codes

Samsung microwaves are designed to be user-friendly, but when something goes wrong, they communicate through error codes. Below, we’ll explore some of the most common error codes you might encounter.

SE (5E) Error Code

What it means: The SE or 5E error code is one of the most notorious and signifies a problem with the microwave’s touchpad. It’s often caused by moisture or grease interfering with the touchpad contacts.

What to do: First, try to unplug the microwave for a few minutes to reset the system. If the error persists, you may need to clean the touchpad or, in some cases, replace it.

E-11 Error Code

What it means: This error indicates an issue with the gas sensor, which is pivotal for microwaves combining traditional and convection functions.

What to do: Check if the sensor is dirty or obstructed. If cleaning doesn’t help, the sensor may need to be replaced. It’s best to call a professional for this repair.

E-13 Error Code

What it means: The E-13 error code points to a problem with the humidity sensor.

What to do: Similar to the E-11, check the sensor for any dirt or blockages. If cleaning doesn’t resolve the issue, the sensor may need replacement.

tE or tC Error Code

What it means: These error codes usually indicate a problem with the temperature sensor.

What to do: Ensure the sensor is securely connected and not damaged. If everything seems in order, you may need a new temperature sensor.

E-83 Error Code

What it means: This code suggests a communication error between the main PCB (printed circuit board) and the sub PCB.

What to do: This could be due to a loose or faulty connection. Check the wiring and connections between the PCBs. If you’re not comfortable doing this, enlist the help of a service technician.

Less Common Samsung Microwave Error Codes

While the above codes are more frequently seen, there are other, less common error codes that can occur.

C-d0 Error Code

What it means: This code indicates a problem with the door lock system.

What to do: Check the door latch mechanism and micro-switches for any signs of wear or damage. Replacing faulty components usually resolves this issue.

H97, H98, or H99 Error Code

What it means: These codes are associated with a failure in the microwave’s magnetron, inverter, or circuitry.

What to do: Due to the complexities and dangers associated with high-voltage components, it’s recommended to contact a professional technician for these repairs.

PC Error Code

What it means: This error signifies a malfunction with the power-convection function.

What to do: Check for obstructions or issues with the convection fan. If the fan is not the problem, the error could be pointing to a more complex issue with the control board or other components.

Troubleshooting Tips

Before you call a service technician, here are a few troubleshooting steps you can take when you encounter an error code:

1. Power Cycle: Unplug the microwave for a minute or two, then plug it back in. This can sometimes reset the system and clear transient errors.
2. Clean Contacts: If the error involves a sensor or touchpad, gently clean the contacts with a soft, damp cloth.
3. Inspect Components: Check visible components like the door latch and convection fan for obvious signs of damage or obstruction.
4. Consult the Manual: Your microwave’s user manual may have specific instructions for certain error codes.

Remember, while some issues can be resolved with a simple reset or cleaning, others may involve high-voltage components that should only be handled by professionals.

When to Call a Professional

If you’ve tried the basic troubleshooting steps without success, it’s time to call in a pro. Here are some signs that professional help is needed:

• The error code persists after resetting and cleaning.
• The error involves high-voltage parts like the magnetron or inverter.
• There’s physical damage to internal components.
• You’re not confident in your ability to safely perform repairs.

Preventative MeasuresWelcome back to TheKitchenApplianceDad.com! If you’re facing an error message on your Samsung microwave and wondering what it means, you’ve come to the right place. Microwaves are a staple in modern kitchens, and Samsung is a brand that combines functionality with advanced technology. However, even the best appliances can experience hiccups, and understanding error codes is crucial to troubleshooting. Let’s dig into the various Samsung microwave error codes and what they indicate about your appliance’s status.

Understanding Samsung Microwave Error Codes

Error codes on your Samsung microwave are designed to help diagnose issues efficiently. When an error code appears, it’s the machine’s way of telling you that it needs attention. Here’s a comprehensive guide to what these codes mean and how to address them.

SE (5E) Error Code – Malfunctioning Touchpad

One of the most common error codes for Samsung microwaves is SE or sometimes displayed as 5E. This error is a signal that there’s a problem with the touchpad, possibly due to moisture or a short circuit.

What to Do:

• Disconnect the power: Unplug the microwave for a few minutes to reset it.
• Dry the touchpad: If moisture is the culprit, let the touchpad dry out.
• Clean the touchpad: Carefully clean the touchpad to remove any grease or food residue.
• Contact support: If the problem persists, it may require a touchpad replacement, which should be done by a professional.

E-11 Error Code – Gas Sensor Issue

The E-11 error code can appear in models that have a gas sensor. This may signal a fault in the sensor or its circuit.

What to Do:

• Inspect the sensor: Clean it if it’s dirty, and make sure there are no obstructions.
• Reset the microwave: Like with the SE code, try resetting your appliance.
• Seek professional help: If cleaning doesn’t fix the error, the sensor might need replacement. It’s time to call in a technician.

E-13 Error Code – Humidity Sensor Failure

E-13 indicates a problem with the humidity sensor, which can affect cooking performance.

What to Do:

• Check the sensor: Clean it and ensure it’s not blocked by food particles.
• Reset the appliance: A simple reset can sometimes clear this error.
• Sensor replacement: Persistent issues may require a new humidity sensor.

tE or tC Error Code – Temperature Sensor Error

tE or tC errors are related to the temperature sensor. When this sensor fails, it could impact the microwave’s ability to cook food properly.

What to Do:

• Secure connections: Make sure the sensor’s connections are tight and secure.
• Sensor check: Look for any signs of damage to the sensor and replace it if necessary.

E-83 Error Code – PCB Communication Error

The E-83 error typically means there’s a communication error between the main and sub printed circuit boards (PCBs).

What to Do:

• Inspect wires: Check for any loose connections or damaged wiring and secure them.
• Consult the manual: Your user manual may have specific instructions for this error.
• Call a service technician: PCB issues can be complex and might require professional assistance.

Troubleshooting and Maintenance Tips

Beyond understanding the error codes, it’s vital to keep your Samsung microwave in top condition. Regular maintenance can prevent many issues from arising and extend the life of your appliance.

• Keep it clean: Regularly clean the interior and exterior of your microwave, including the touchpad and sensors.
• Use it properly: Follow the user manual’s guidelines for the best cooking results and to prevent unnecessary wear and tear.
• Ventilation: Ensure your microwave is well-ventilated to prevent overheating.
• Professional servicing: Have your microwave serviced by a professional every few years to maintain its performance and safety.

Key Takeaways

To wrap up, here are the key points from our discussion about Samsung microwave error codes:

• Error codes are diagnostic tools: They help identify specific issues with your microwave.
• Common codes include SE, E-11, E-13, tE/tC, and E-83: Each code points to a different potential problem, from touchpad malfunctions to PCB communication errors.
• Initial troubleshooting can be simple: Try resetting your microwave or cleaning relevant components.
• Safety first: When in doubt, especially with high-voltage components or complicated errors, consult with a professional technician.
• Regular maintenance is crucial: Keep your microwave clean and well-maintained to prevent future errors.

Remember, while some issues can be quickly fixed at home, don’t hesitate to seek professional help for complex problems. Your Samsung microwave is a culinary companion worth taking care of. Visit us again at TheKitchenApplianceDad.com for more tips, tricks, and appliance insights.