The Ninja Foodi Max XL Fryer is an excellent appliance for air frying, pressure cooking, steaming, broiling, baking, roasting, and dehydrating. However, like any kitchen gadget, it can occasionally run into problems. This comprehensive guide covers the most common Ninja Foodi Max XL fryer error codes and provides troubleshooting tips to get your appliance back up and running.

Common Ninja Foodi Max XL Fryer Error Codes

E1

Error Code: E1

Indication: Pot detection error. The unit cannot detect the inner pot.

Resolution:

• Reinsert the inner pot and restart the cooker.
• If issue persists, contact Ninja support.

E2

Error Code: E2

Indication: Overheat error. The internal temperature is too high.

Resolution:

• Unplug and allow the unit to fully cool before restarting.
• If problem continues, call Ninja support.

E3

Error Code: E3

Indication: Sensor detect error. One of the internal sensors is not working.

Resolution:

• Try restarting the unit.
• If error persists, contact Ninja for service.

E4

Error Code: E4

Indication: Motor speed error. The motor is not spinning at the correct speed.

Resolution:

• Unplug and restart the appliance.
• If issue continues, the motor likely needs repair.

E5

Error Code: E5

Indication: Heating element error. There is an issue with the heating element.

Resolution:

• The heating element likely needs replacement by a technician.
• Contact Ninja support for service.

E6

Error Code: E6

Indication: Internal wiring error. There is an issue with the internal wires or PC board.

Resolution:

• Contact Ninja support for troubleshooting and repair.

E7

Error Code: E7

Indication: Fan motor error. The internal fan motor has malfunctioned.

Resolution:

• Have the fryer serviced to replace the broken fan motor.

E8

Error Code: E8

Indication: Temperature probe error. The temperature sensor probe that monitors cooking temperature is not functioning properly.

Resolution:

• Reset the appliance by unplugging and restarting.
• If the E8 error persists, the temperature probe may need to be replaced. Contact Ninja support.

E9

Error Code: E9

Indication: Touch panel error. There is a communication issue between the digital touch panel and the control board.

Resolution:

• Try rebooting the fryer by unplugging and plugging back in.
• If the problem continues, the touch panel or control board may need replacing. Contact Ninja service.

E10

Error Code: E10

Indication: Bluetooth error. There is an issue with the Bluetooth communication in models that have app connectivity.

Resolution:

• First try rebooting the fryer and reconnecting Bluetooth.
• Reset Bluetooth on your mobile device and reconnect.
• If still not working, contact Ninja support as internal parts may need repair.

E11

Error Code: E11

Indication: WiFi connectivity error. The fryer is having an issue with WiFi communication in app-connected models.

Resolution:

• Reboot the appliance and router and reconnect WiFi.
• Update router and appliance firmware if available.
• Contact Ninja if troubleshooting does not restore the WiFi connection.

E12

Error Code: E12

Indication: Overvoltage error. The power supply to the unit exceeds safety limits.

Resolution:

• Unplug from the faulty outlet and have an electrician inspect for voltage issues.
• Plug into a different, intact wall outlet rated for the appliance wattage.
• Contact Ninja if it continues, as the power regulation board may need replacement.

E13

Error Code: E13

Indication: Voltage regulator issue. The voltage regulation component that controls the power is not working right.

Resolution:

• Try rebooting the fryer by unplugging and restarting.
• Have an electrician test your electrical supply and wiring.
• If still occurring after troubleshooting, contact Ninja to replace the failed voltage regulator.