do-whirlpool-microwaves-have-filters-how-to-replace

Do Whirlpool Microwaves Have Filters? YES – How To Replace

Microwaves have become an indispensable part of our kitchen. They reheat, defrost, and even cook a variety of dishes in a fraction of the time it would take with traditional methods. But like all appliances, they need a bit of TLC to keep them running smoothly. If you own a Whirlpool microwave, you may have wondered about the filters it uses and how to replace them. In this article from TheKitchenApplianceDad.com, we’ll dive into everything you need to know about Whirlpool microwave filters and how to replace them.

Understanding Microwave Filters

Microwave filters are crucial for maintaining the appliance’s performance and ensuring the air in your kitchen remains clean. They are primarily of two types: grease filters and charcoal filters. Grease filters capture oil and grease particles when you’re cooking on the stove top, preventing them from clogging the microwave’s internal components. Charcoal filters, on the other hand, are used in microwaves that recirculate air rather than vent it outside. They help to remove odors and smoke from the air.

How to Replace Your Microwave Filters | Whirlpool

The Role of Filters in Whirlpool Microwaves

Whirlpool microwaves, being one of the leading brands in the market, are equipped with both types of filters. These filters not only protect the microwave’s interior but also ensure that your kitchen air quality remains pristine. For microwaves that are installed over the range, these filters are even more important because they have a double function: enhancing the microwave’s performance and functioning as a range hood filter.

Identifying When to Replace Your Whirlpool Microwave Filters

Grease filters should be checked and cleaned regularly. Over time, if they become too saturated and can’t be cleaned effectively, it’s time for a replacement. On average, it’s advisable to replace grease filters every six months, depending on your cooking frequency.

Charcoal filters cannot be cleaned and should be replaced every six to twelve months based on usage. If you start noticing persistent odors even after using the microwave, it’s a sign that the charcoal filter needs replacement.

How to Replace Whirlpool Microwave Grease Filters

Step 1: Locate the Grease Filter

In most Whirlpool microwaves, the grease filter will be found on the bottom of the microwave. It’s usually easy to see and reach without the need for any tools.

Step 2: Remove the Old Filter

To remove the old grease filter, simply slide it to the side or push it upward through the tabs that hold it in place. Once it’s released, you can pull it out gently.

Step 3: Clean the Area

Before installing a new filter, take this opportunity to clean the area where the grease filter was located. This will ensure better efficiency and adherence of the new filter.

Step 4: Install the New Filter

Take the new grease filter and slide it into place, making sure it fits securely within the tabs or the frame that holds it.

How to Replace Whirlpool Microwave Charcoal Filters

Step 1: Locate the Charcoal Filter

The charcoal filter is usually located in a different spot than the grease filter. It might be behind the vent grille or within the microwave itself, depending on the model.

Step 2: Remove the Old Filter

To access the charcoal filter, you may need to unscrew the vent grille or open the microwave’s access panel. Once you reach the charcoal filter, take it out by detaching it from its housing.

Step 3: Install the New Filter

Take your new charcoal filter and place it in the same location as the old one. Make sure it fits snugly and that any tabs or latches are secured.

Step 4: Reassemble the Microwave

If you had to remove any panels or grilles, now is the time to put them back in place. Ensure everything is secured properly before you start using the microwave again.

Tips for Maintaining Your Whirlpool Microwave Filters

  • Regular Checks: Make a habit of checking your grease filter once a month and your charcoal filter every three months.
  • Cleaning: For grease filters, soak them in hot water mixed with a bit of dish soap. Use a soft brush to scrub away any stubborn grease.
  • Replacement: Always use Whirlpool recommended filters for your microwave to ensure compatibility and efficiency.
  • Safety: Always unplug your microwave before performing any maintenance tasks.

Where to Buy Replacement Filters

Replacement filters for Whirlpool microwaves can be purchased directly from the Whirlpool website, from an authorized dealer, or from various online retailers like Amazon. Make sure to have your microwave’s model number handy to ensure you’re buying the correct filters.

Key Takeaways

  • Whirlpool microwaves come equipped with both grease and charcoal filters to ensure proper function and clean kitchen air.
  • Grease filters should be cleaned regularly and replaced every six months or when they can no longer be effectively cleaned.
  • Charcoal filters cannot be cleaned and should be replaced every six to twelve months or when persistent odors are noticed.
  • Replacement filters should always be Whirlpool recommended for compatibility and efficiency, and can be purchased from the Whirlpool website, authorized dealers, or online retailers.
  • Always unplug your microwave before attempting to replace filters and follow safety guidelines.

By keeping these points in mind, you can ensure that your Whirlpool microwave continues to function at its best while also maintaining the air quality in your kitchen. Remember to stay on top of maintenance, and your microwave will stay a reliable kitchen companion for years to come.

Meet

Dale

Hi, I'm Dale! With over ten years in high volume restaurants, my journey has taken me through the ins and outs of using, maintaining, and even repairing virtually every kitchen appliance imaginable.

I'm here to share simple, straightforward advice to help you choose and use your kitchen tools effectively. No fluff, just the essential info you need to cook up a storm.